
Add to Cart
Huawei Network Switch S5720-36C-EI-28S-AC 28 x 100/1000 Base-X SFP , 4 x 10 Gig SFP+
Huawei S5720-36C-EI-28S-AC Gigabit Switch provides resilient, energy-efficient GE ports for access switching in data centers, and aggregation switching in enterprise campus networks. With twenty-eight 100/1,000 Base-X SFP ports, four combo 100/1,000 Base-T Ethernet ports and four 10G SFP+ ports, its performance enhancements include advanced processing hardware, large MAC address and routing tables; It also has multiple cards modules to meet customer s' different needs. Super Virtual Fabric (SVF) support enables intelligent virtualization, iStack clustering, and operation in N + 1 backup mode for simplified O&M and high availability. Mature IPv6 features ensure smooth migration to next-generation IP networking.
Product Code | S5720-36C-EI-28S-AC |
Fixed Ports | 28 x 100/1,000 Base-X SFP (4 GE Combo), 4 x 10 Gig SFP+ |
Extended Slots | One extended slot |
Memory (RAM) | 2 GB |
Flash | 340 MB |
MAC Address Table Size Forwarding Performance | 64 MAC |
Forwarding Performance | 132 Mpps |
Switching Capacity | 598 Gbit/s |
Power Supply | AC power supply |
PoE | Not Supported |
Voltage Required | AC Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 47 Hz/63 Hz |
Front Power Input | No No |
Typical Power Consumption | 47.9 W |
Dimensions (W x D x H) | 442 mm x 420 mm x 44.4 mm |
Shows the front panel of Huawei S5720-36C-EI-28S-AC switch.
Note:
① | Twenty-four 100/1000BASE-X ports | ② | Four combo ports (10/100/1000BASE-T + 100/1000BASE-X) |
③ | Four 10GE SFP+ ports | ④ | One mini USB port |
⑤ | ETH management port | ⑥ | One USB port |
⑦ | One console port |
* The console port is used with a console cable. The console cable is not delivered with the switch and needs to be separately purchased if needed.
shows the back panel of Huawei S5720-36C-EI-28S-AC switch.
Note:
① | Ground screw | ② | ESN label |
③ | Rear card slot | ④ | Fan slot |
⑤ | Power module slot 2 | ⑥ | Power module slot 1 |
*The ground screw is used with a ground cable.
* You can draw the ESN label out to view the ESN and MAC address of the switch.
Model | Description |
GE-SFP Optical Transceiver | |
eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
SFP-1000BaseT | Electrical Transceiver, SFP , GE ,Electrical Interface Module(100m,RJ45) |
10G-SFP+ Optical Transceiver | |
SFP-10G-USR | 10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm,0.1km,LC) |
OMXD30000 | Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
OSX010000 | Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm,10km,LC) |
Card | |
ES5D21X02S01 | 2 10 Gig SFP+ Interface Card(used in S5720EI series) |
ES5D21X02T01 | 2 10 Gig RJ45 Interface Card(used in S5720EI series) |
ES5D21VST000 | Dedicated stack card with 2*QSFP+ interface(Including one PCS of 1M QSFP+ cable ,Used in S5720EI series) |
the comparison of Huawei S5720-36C-EI-AC, S5720-36C-PWR-EI-AC and S5720-36C-EI-28S-AC.
Models | S5720-36C-EI-AC | S5720-36C-PWR-EI-AC | S5720-36C-EI-28S-AC |
Fixed Ports | 28 x 10/100/1,000 Base-T (4 GE Combo SFP), 4 x 10 Gig SFP+ | 28 x 10/100/1,000 Base-T (4 GE Combo SFP), 4 x 10 Gig SFP+ | 28 x 100/1,000 Base-X SFP (4 GE Combo), 4 x 10 Gig SFP+ |
Extended Slots | One extended slot | One extended slot | One extended slot |
PoE | Not supported | Supported | N Not supported |
Forwarding Performance | 132 Mpps | 132 Mpps | 132 Mpps |
Switching Capacity | 598 Gbit/s | 598 Gbit/s | 598 Gbit/s |
Front Power Input | No | No | No |
Power Consumption | 39.5W | without PD: 48.5W, with PD: < 864.3W (PoE: 740W) | 47.9W |