
Add to Cart
S6720-54C-EI-48S-DC Huawei S6700 Series 48 Ports Network Switch 48 x 10 Gig SFP+
The S6720 series switches (S6720s) are next-generation 10G box switches. The S6720 can function as an access switch in an Internet Data Center (IDC) or a core switch on a campus network.
The S6720 has industry-leading performance, provides up to 24 or 48 line-speed 10 GE ports and a maximum of 6 line-speed QSFP+ ports. It can be used in a data center to provide 10 Gbit/s access to servers or function as a core switch on a campus network to provide 10 Gbit/s traffic aggregation. In addition, the S6720 provides a wide variety of services, comprehensive security policies, and various QoS features to help customers build scalable, manageable, reliable, and secure data centers.
Item | S6720-30C-EI-24S-AC S6720-30C-EI-24S-DC | S6720-54C-EI-48S-AC S6720-54C-EI-48S-DC |
---|---|---|
Fixed Ports | 24 x 10 Gig SFP+, 2 x 40 Gig QSFP+ ports | 48 x 10 Gig SFP+, 2 x 40 Gig QSFP+ ports |
Extended Slot | One extended slot for 4 x 40 Gig QSFP+ interface card | |
MAC Address Table | 288K MAC address entries MAC address learning and aging Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses | |
VLAN | 4K VLANs Guest VLAN and voice VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping QinQ and selective QinQ | |
IPv4 Routing | Static routing, RIPv1, RIPv2, ECMP, and URPF OSPF, IS-IS, and BGP VRRP Policy-based routing Routing policy | |
IPv6 Routing | Static route IPng OSPFv3 BGP4+ ISISv6 | |
IPv6 Features | Neighbor Discovery (ND) PMTU IPv6 ping, IPv6 tracert, and IPv6 Telnet 6to4 tunnel, ISATAP tunnel, and manually configured tunnel ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping | |
Multicast | Static Layer 2 multicast MAC address Controllable multicast | |
QoS/ACL | Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports | |
MPLS | MPLS, MPLS VLL, L3VPN | |
VPLS | Martini VPLS | |
Reliability | STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032v2) BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM E-Trunk | |
Security | User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication and TACACS authentication SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist | |
Management and Maintenance | iStack (using service ports as stack ports) MAC Forced Forwarding (MFF) Virtual cable test Ethernet OAM (IEEE 802.3ah and 802.1ag) Local port mirroring and Remote Switched Port Analyzer (RSPAN), allowing an observing port to forward packets Remote configuration and maintenance using Telnet SNMP v1/v2c/v3 RMON Web NMS System logs and alarms of different levels GVRP MUX VLAN | |
Operating Environment | Operating temperature: Zero meters to 1,800m: 0°C to 45°C; 1,800m to 5,000m: 1°C decrease for every 220m increase in altitude Relative humidity: 5% to 95% (non-condensing) | |
Input Voltage | AC: Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz DC: Rated voltage range: –48V to –60V Maximum voltage range: –36V to –72V | |
Dimensions (W x D x H, in mm) | 442 x 420 x 43.6 | |
Typical Power Consumption | Without subcard: 147W; With subcard: 166W | Without subcard: 190W; With subcard: 209W |
Related products
S5700-28P-LI-AC S5700-26X-SI-12S-AC S5700-10P-PWR-LI-AC
S5700-10P-LI-AC S5700-28C-EI-AC S5700-48TP-PWR-SI-AC
S6700-24-EI S6700-48-EI S6720-32C-SI-AC
S6720-16X-LI-16S-AC S6720-26Q-SI-24S-AC S6720S-16X-LI-16S-AC