FAP-231F-C 1007 Fortinet FortiAP 231F 2x2 Wi-Fi 6 (802.11ax), Indoor wireless AP
|
Product
|
Meaning
|
|
Product status
|
Stock
|
|
Type
|
Wired and wireless
|
|
VPN support
|
Yes
|
|
Brand name
|
FOR TI network
|
|
Model number
|
FAP-231F-C 1007
|
|
Place of origin
|
China
|
|
|
Shanghai
|
|
Hardware type
|
Indoor AP
|
|
Number of radio stations
|
3 + 1 BLE
|
|
Number of antennas
|
3 dual-band internal Wi-Fi 1 BLE/ZigBee
|
|
Interfaces
|
2x10/100/1000 base
|
|
Power over Ethernet (PoE)
|
1 x 802.3at PoE default 1 x 802.af PoE no USB function
|
|
Kensington Castle
|
Yes
|
|
Reset button
|
Yes
|
|
LED off mode
|
Yes
|
|
OFDMA
|
Yes
|
|
Hardware type
|
Indoor AP
|
|
Number of radio stations
|
3 + 1 BLE
|
|
Number of antennas
|
3 dual-band internal Wi-Fi + 1 BLE/ZigBee
|
|
Antenna Type and Peak Gain
|
pifa antenna
Dual band: 4.5dBi for 2.4GHz and 5.5dBi for 5GHz
BLE antenna 4.0dBi in 2.4GHz band
|
|
Frequency Bands (GHz)
|
2.400-2.4835, 5.150-5.250, 5.250-5.350, 5.470-5.725, 5.725-5.850
|
|
Radio 1 features
|
Frequency band: 2.4 GHz
Channel width: 20/40 MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO circuits: 2x2 Service
|
|
Radio 2 features
|
Frequency band: 5.0 GHz
Channel width: 20/40/80 MHz
Modulation: BPSK, QPSK, 64/256/1024 QAM
MIMO circuits: 2x2 Service
|
|
Radio 3 possibilities
|
Frequency bands: 2.4 GHz and 5.0 GHz
MIMO circuits: 1x1 frequency scan
|
|
Maximum data transfer rate
|
Radio 1: up to 574 Mbps
Radio 2: up to 1201 Mbps
Radio 3: Scan rate only
|
|
Bluetooth low energy radio
|
Bluetooth scanning and advertising iBeacon @ 10 dBm Max TX power
|
|
Interfaces
|
2x 10/100/1000 Base-T RJ45, 1x Type 2.0 USB, 1x RS-232 RJ45 serial port
|
|
Power over Ethernet (PoE)
|
1 x 802.3at PoE default
1 x 802.af PoE no USB function
|
|
Simultaneous SSIDs
|
Up to 16 (14 if background scanning is enabled)
|
|
Type(s) EAP
|
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
|
User/Device Authentication
|
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared Key, WEP, Web Portal, MAC Block List, and
|
|
Maximum power Tx (conducted)
|
Radio 1: 2.4 GHz: 23 dBm / 200 mW (2 circuits combined)
Radio 2: 5 GHz: 22 dBm / 158 mW (2 circuits combined)
Radio 3: NA
|
|
Kensington Castle
|
Yes
|
|
IEEE Standards
|
802.11a 802.11b 802.11e 802.11g 802.11H 802.11i 802.11j 802.11K 802.11n 802.11r 802.11V 802.11ac 1Q,
802.1 X, 802.3ad, 802.3af, 802.3at, 802.3az
|
|
Supported SSID Types
|
Local-bridge, tunnel and grid
|
|
Radio client capacity
|
Up to 512 radio clients (Radio1 and Radio2)
|
|
Cellular coexistence
|
Yes
|
|
Reset button
|
Yes
|
|
LED off mode
|
Yes
|
|
OFDMA
|
Yes
|
|
Spatial Reuse (BSS coloring)
|
Yes
|
|
UL MU-MIMO 802.11ax mode
|
Yes
|
|
DL-MU-MIMO
|
Yes
|
|
Extended Wake Time Target (TWT)
|
Yes
|
|
ZeroWait DFS/Agile DFS
|
No
|
|
Rogue Scan Radio Modes
|
Background highlighted
|
|
WIPS / WIDS radio modes
|
Background information highlighted (recommended)
|
|
Packet sniffer mode
|
Yes
|
|
Spectrum analyzer
|
Yes
|
|
Length x Width x Height
|
6.0x6.0x2.86" (153.2x153.2x53.0mm)
|
|
Mounting options
|
Ceiling, T-Rail and Wall
|
|
Accessories included
|
Standard mounting kit for ceiling, T-rail and wall
|
|
Power supply
|
802.3at PoE SP-FAP200-PA-XX or GPI-130
|
|
Power consumption (maximum)
|
17 W
|
|
Humidity
|
5 - 90% non-condensing
|
|
Operating/Storage temperature
|
32-122°F (0 - 50°C) / -22-158°F (-30-70°C)
|
|
directives
|
Low Voltage Directive • RoHS
|
|
Plenum UL2043 Material
|
No
|
|
Average time between failures
|
> 10 years
|
|
IP Rating
|
ON
|
|
Built-in surge protection
|
Yes
|
|
Failed PoE failure
|
ON
|
Overview:
FortiAP access points are managed centrally by the integrated WLAN controller of any FortiGate® security appliance or through the FortiAP Cloud provisioning and management portal. With the integration of the wireless controller functionality into the market-leading FortiGate appliance, these APs are perfect for protecting your LAN Edge from the campus to branch deployments. Fortinet’s Security Fabric enables you to easily manage wired and wireless security from a single pane-of-glass management console and protects your network from the latest security threats.
Unified Management
Unified management console simplifies operations, ensuring consistency in effective policy enforcement and compliance.
Advanced Security Protection
Wireless LAN security done right, from the leader in network security. Integrated Firewall, IPS, Application Control, and Web Filtering protect the wireless LAN from the latest security threats.
Built-in Wi-Fi Security
Protects the network from advanced wireless threats and satisfies PCI DSS compliance.
Highlights
This enterprise class Wi-Fi 6 indoor AP provides three radios as well as features such as OFDMA and dual 1 Gbps Ethernet ports for PoE diversity. The AP can provide 24/7 scanning across both bands while still providing access on both the 2.4 and 5 GHz bands. The integrated BLE radio can be used for beacons and locationing applications.
