
Add to Cart
ES0Z1B06ACS0 is the Huawei S7706 Basic Engine AC Bundle(Including non-PoE Assembly Chassis, SRUA Main Board*2, 800W AC Power*2).
Figure 1 shows the appearance of ES0Z1B06ACS0 (front view).
Figure 2 shows the appearance of ES0Z1B06ACS0 (rear view).
Table 1 shows the Quick Specs.
Product Code | ES0Z1B06ACS0 |
Switching Capacity | 3.84 Tbit/s |
Forwarding Performance | 2,880 Mpps |
Redundancy Design | Supervisors, Power modules, CMUs, Fans trays |
Buffer Capacity | 200 ms per Port |
Pack Weight (kg) | 45.8 |
Pack Volume (m^3) | 0.247 |
Pack Dimension (D*W*H mm) | 638*612*632 |
Net Dimension (D*W*H mm) | 489*442*442 |
Figure 2 shows the S7706 chassis structure (front view). ES0Z1B06ACS0 is the Huawei S7706 Basic Engine AC Bundle(Including non-PoE Assembly Chassis, SRUA Main Board*2, 800W AC Power*2),the other modules or cards must be purchased separately.
Note:
① | Six service cards, including: Open Service Platform Unit 100M Interface Card 1000M Interface Card GE/10GE Interface Card 10GE Interface Card 40GE Interface Card 40GE/100GE Interface Card 100GE Interface Card NOTE: The cards supported by a switch depends on the software version. |
② | Two MPUs |
③ | A pair of mounting brackets NOTE: The mounting brackets are used to secure the chassis in the cabinet. |
④ | Four power modules |
⑤ | Two EH1D200CMU00-Centralized Monitoring Unit |
⑥ | Four PoE power modules In versions earlier than V200R006C00: 800 W AC Power Module 2200 W AC Power Module In V200R006C00 and later versions: 2200 W DC Power Module 800 W AC Power Module 2200 W AC Power Module |
⑦ | Ground screw NOTE: The ground screw is used to ground the chassis. |
⑧ | Front ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
⑨ | Cable management frames NOTE: Cable management frames are used to route cables. |
Figure 3 shows the S7706 chassis structure (rear view). ES0Z1B06ACS0 is the Huawei S7706 Basic Engine AC Bundle(Including non-PoE Assembly Chassis, SRUA Main Board*2, 800W AC Power*2),the other modules or cards must be purchased separately.
Note:
① | Two Fan Module |
② | Rear ESD jack NOTE: The ground terminal of an ESD wrist strap can be inserted in this jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded. |
③ | Air filter NOTE: The air filter prevents dust from entering the chassis. |
④ | A pair of removable handles NOTE: You can install these handles on two sides of the chassis to lift the chassis. |
Table 2 shows the recommended elements for the ES0Z1B06ACS0.
Model | Description |
AC power module | |
W2PSA0800 | 800W AC Power Module(Black) |
PAC-2200WF | 2200W AC Power Module |
DC power module | |
W2PSD2200 | 2200W DC Power Module(Black) |
ES02PSD16 | 1600W DC Power Module(Black) |
FE-SFP optical transceiver | |
SFP-FE-SX-MM1310 | Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
eSFP-FE-LX-SM1310 | Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
S-SFP-FE-LH40-SM1310 | Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
GE-SFP optical transceiver | |
eSFP-GE-SX-MM850 | Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
SFP-GE-LX-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
S-SFP-GE-LH40-SM1310 | Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
S-SFP-GE-LH40-SM1550 | Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
10G-SFP+ optical transceiver | |
SFP-10G-USR | 10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
OMXD30000 | Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
OSX010000 | Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
40GE CFP optical transceiver | |
CFP-40G-SR4 | High Speed Transceiver CFP-40G-SR4,CFP,40G,Multimode Module(850nm,4*10G,0.1km,MPO) |
CFP-40G-LR4 | High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC) |
| High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC) |
40GE QSFP+ optical transceiver | |
QSFP-40G-eSR4 | 40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver) |
QSFP-40G-ER4 | 40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC) |
100GE CFP optical transceiver | |
| High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO) |
| CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC) |
| High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC) |
GE copper transceiver | |
SFP-1000BaseT | Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
100GE interface card | |
ES1D2C02FEE0 | Huawei 2-Port 100GBASE-X Interface Card(EE,CFP) ES1D2C02FEE0 |
10GE interface card | |
ES1D2X40SFC0 | 40-Port 10GBASE-X Interface Card(FC,SFP+) |
ES1D2X16SSC2 | Huawei 16-Port 10GBASE-X Interface Card(SC,SFP+) ES1D2X16SSC2 |
Main control unit | |
ES0D00MCUA00 | S7703 Main Control Unit A |
Fan module | |
ES0E2FBX | S7700 Wide Voltage Fan Box |
Table 3 shows the comparison of ES0Z1B06ACS0, ES0Z1B03ACS0 and ES0Z1B12ACS0.
Product Code | ES0Z1B06ACS0 | ES0Z1B03ACS0 | ES0Z1B12ACS0 |
Switching Capacity | 3.84 Tbit/s | 1.92 Tbit/s | 3.84 Tbit/s |
Forwarding Performance | 2,880 Mpps | 1,440 Mpps | 2,880 Mpps |
Redundancy Design | Supervisors, Power modules, CMUs, Fans trays | Supervisors, Power modules, CMUs, Fans trays | Supervisors, Power modules, CMUs, Fans trays |
Buffer Capacity | 200 ms per Port | 200 ms per Port | 200 ms per Po rt |
Pack Weight (kg) | 45.8 | 21.8 | 56.1 |
Pack Volume (m^3) | 0.247 | 0.124 | 0.322 |
Pack Dimension (D*W*H mm) | 638*612*632 | 652*595*322 | 810*650*610 |
Net Dimension (D*W*H mm) | 489*442*442 | 489*442*175 | 489*442*664 |